NCIDQ

Start Studying!

Terms

undefined, object

copy deck

NFPA 257: STANDARD FOR FIRE TEST FOR WINDOWS AND GLASS BLOCK ASSAMBLIES. PRESCRIBES SPECIFIC FIRE AND HOSE STEEAM TEST PROCEDURES.
TCO: TEMPORARY CERTIFICATE OF OCCUPANCY OR PARTIAL OCCUPANCY LETTER
AATCC METHOD 147: "BACTERIA RESISTANCE TEST": DETECTS BACTERIOSTATIC ACTIVITY ON TEXTILE MATERIALS.
ANSI: AMERICAN NATIONAL STANDARDS INSTITUTE
B171 ID: STANDARD FORM OF AGREMENT BETWEEN OWNER AND ARCHITECT OR INTERIOR ARCHITECTURE SERVICES
VOC: VOLATILE ORGANIC COMPOUNTS
ASTM F1679: This test method covers the operational procedures for using a variable incidence tribometer (VIT) for determining the slip resistance of planar walkway surfaces or walkway surrogates (test surfaces) and can be used for footwear bottom materials and surrogates (test feet) in either the laboratory or field under dry, wet, or contaminated conditions. This test method does not address all methodological issues (for example, test surface and test foot material selection and preparation, experimental design, or report preparation).
DIVISION 14: CONVEYING EQUIPMENT ( ELEVATOR, ESCALATORS, MOVING WALK AND LIFTS)
NFPA 286: STANDARD METHOS OF FIRE TEST FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIROR FINISH TO ROOM FIRE GROWTH. SIMILAR TO NFPA 265. EVALUATES HEAT AND SMOKE RELEASED, COMBUSTION PRODUCTS RELEASED AND THE POTENCIAL FOR FIRE SPREAT BEYOND THE ROOM.
AATCC TEST METHOD 16- FADE-OMETER TEST: COLORFASTNESS OF TEXTILES EXPOSE TO LIGHT.
A775 ID: INVITATION AND INSTRUCTIONS FOR QUOTATION OF FF&E
ASTM D3884: "TABER ABRASER TEST": ALSO KNOW AS THE ROATRY PLATAFORM, DOUBLE-HEAD METHOD. DETERMINES THE ABRASION RESISTANCE OF TEXTILES, MOST COMUNLY CARPET.
PURE-PERFORMANCE SPEC: (OPEN) ENCOURAGE NEW WAY TO ACHIEVE A PARTICULAR RESULT.
DIVISION 05: METALS (STRUCTURAL AND ORNAMENTAL)
A175 ID: STANDARD FORM OF AGREMENT BETWEEN OWNER AND VENDOR FOR FF&E. WHERE THE BASIS OF PAYMENT IS A STIPULATED SUM.
DIVISION 04: MASONARY
DIVISION 13: SPECIAL CONSTRUCTION (LARGE SCALE SPECIALTIES LIKE SAUNAS, SEISMIC CONTROL, ETC)
BIFMA X5.3: OFFICE VERTICAL FILES
REFERENCE SPEC: (OPEN) REFERS TO TEST AS ASTM, UL OR ANSI. (VARIATION OF THE DESCRIPTIVE)
DIVISON 21: FIRE SUPPRESION
DIVISION 06: WOOD, PLASTIC AND COMPOSITES (ROUGH CARPENTRY, FINISH CARPENTRY, MILWORK)
PROPIETARY SPEC: (CLOSED) SPECIFIC MANUFACTURES. NO BIDDING.
ASTM D2859: PILL TEST-STANDARD TEST METHOD FOR IGNITION CHARACTERISTICS OF FINISHED TEXTILES. FLOOR COVERING MATERIALS. (CARPET AND AREA RUGS)
DIVISION 00: PROCUREMENT AND CONTARCTING REQUIREMENTS
ASTM D4157: "WYZENBEEK ABRASION RESISTANCE TEST": ALSO KNOWN AS OSCILLATORY CYLINDER TEST METHOD. DETERMINES THE ABRASION RESISTANCE OF WOVEN TEXTILE FABRICS.
ASTM F1677: This test method covers the operational procedures for using a portable inclinable articulated strut slip tester (PIAST) for determining the slip resistance of footwear sole, heel, or related materials (test feet) against planar walkway surfaces or walkway surrogates (test surfaces) in either the laboratory or the field under dry, wet, or contaminated conditions.
DIVISON 25: INTEGRATED AUTOMATION (ENVIROMENTAL CONTROLS, LIGHTING CONTROL, ETC)
NFPA 701: ALSO KNOWN AS VERTICAL IGNITION TEST. STANDARD METHOD OF FIRE TEST FOR FLAME PROPAGATION OF TEXTILES AND FILM. (WINDOW TREATMENTS)
DIVISION 08: OPENINGS (DOORS-WOOD OR METAL-, WINDOWS, HARDWARE, CURTAIN WALLS, SKY LIGHTS, GLAZZING)
DIVISON 28: ELECTRONIC SAFETY AND SECURITY
NFPA 80: STANDARD FOR FIRE DOORS AND WINDOWS, DEALS WITH THE CONSTRUCTION AND INSTALLATION OF FIRE DOORS.
BIFMA X5.2: OFFICE LATERAL FILES
MSDS: MATERIAL SAFETY DATA SHEET
U or O: LETTER OF OCCUPANCY OR USE AND OCCUPANCY LETTER
DIVISION 26: ELECTRICAL
BIFMA G1: ERGONOMIC FURNITURE USED IN OFFICES
AATCC CROCKMETER METHOD- TEST METHOD 8: DETERMINES THE AMOUNT OF COLOR TRANSFERED BY A COLOR TEXTILE TO OTHER SURFACES BY RUBBING.
ASTM E 163: TEST FOR WINDOW ASSAMBLIES ENDURANCE OF GLAZZING FOR 45 MINUTES TO FLAME AND HEAT TRANSFER.
DIVISION 12: FURNISHING
A 101: STANDARD FORM OF AGREMENT BETWEEN OWNER AND CONTRACTOR. WHERE THE BASIS OF PAYMENT IS A STIPULATED SUM.
ASTM: AMERICAN SOCIATY FOR TESTING MATERIALS
ASTM E648 - NFPA 253: "FLOORING RADIANT PANEL TEST": MESUARES THE FLAME SPREAD IN CORRIDORS AND EXIT WAYS. (CARPET, RESILIENT FLOORING AND ANY FLOOR IN CORRIDORS). CLASSIFIES BY: CLASS I: RADIANT FLUX OF NOT LESS THAN 0.45( CORRIDORS AND EXIT WAYS OF HOSPITALS AND NURSING HOMES). CLASS II: RADIANT FLUX OF NOT LESS THAN 0.22(CORRIODRS AND EXIT WAYS OF OTHER OCCUPANCIES EXEPT ONE AND TWO FAMILY DWELLING.
PERFORMANCE SPEC.: (OPEN). TELLS WHAT THE FINAL RESULT THE CONSTRUCTION MUST ACHIEVE
DIVISON 22: PLUMBING
BIFMA X5.9: OFFICE STORAGE UNITS
BIFMA X5.6: PANEL SYSTEMS
Anthropometrics: the measurement of the size and proportions of the human body. Based on this, there is a large body of knowledge about the min. or optimum dims. required for the average human to perform common activities.
DIVISION 07: THERMAL AND MOISTURE PROTECTION
DIVISION 11: EQUIPMENT (MEDIUN SIZE SPECIALTY LIKE LOOCKER, ETC)
ASTM C423: This test method covers the measurement of sound absorption in a reverberation room by measuring decay rate. Procedures for measuring the absorption of a room, the absorption of an object, such as an office screen, and the sound absorption coefficients of a specimen of sound absorptive material, such as acoustical ceiling tile, are described
DIVISION 02: EXISTING CONDITIONS
DIVISON 27: COMUNICATIONS
NFPA 260 - CAL TB 117: CIGARETTE IGNITION RESISTANCE TEST FOR FURNITURE COMPONENTS. SEPATES FABRIC AND FILLING OF UPHOLSTERED FURNITURE.
ASTM C1028: This test method covers the measurement of static coefficient of friction of ceramic tile or other surfaces under both wet and dry conditions while utilizing Neolite heel assemblies. This test method can be used in the laboratory or in the field.
DESCRIPTIVE SPEC: (OPEN) NO TRADE NAMES. DETAIL WRITTEN REQUIREMENT (HARD TO DO)
DIVISION 10: SPECIALTIES ( SMALL SPECIAL ITEMS LIKE BATHROOM ACCS, TOILET COMPARMENTS, FIRE PLACE, SIGNS AWNINGS, ETC)
UL: UNDERWRITTERS LABORATORIES
ASTM E119: STANDARD TEST METHOD FOR FIRE TEST OF BUILDING CONSTRUCTION AND MATERIALS (WALL AND CEILING)
ASTM F462: This consumer safety specification covers the slip resistance of bathtubs and shower structures or combinations, used for bathing or showering, or both, herein referred to as bathing facilities. (Soapy water)
B175 ID: FORM OF AGREMENT BETWEEN OWNER AND ARCHITECT FOR FF&E DESIGN SERVICES
PRESCRIPTIVE SPEC: (CLOSED) TELLS YOU EXACTLY WHAT NEED TO BE USE. NO OPTIONS.
LEED: LEADERSHIP IN ENERGY AND ENVIROMENTAL DESIG
DIVISION 09: FINISHES (ALL TYPES OF FINISHES, PLUS G BOARDS AND FRAMING)
A275 ID: GENERAL CONDITIONS OF THE CONTRACT OF THE FF&E
CO: CERTIFICATE OF OCCUPANCY
BASE-BID SPEC: (CLOSED) OPTIONS "APPROVED OR EQUAL". LIST OF PRE-APPROVED MANUFACTURES.
ASTM F609: This test method covers measurement of the static slip resistance of footwear sole, heel, or related materials on walkway surfaces in the laboratory and in the field.
NFPA: NATIONAL FIRE PROTECTION ASSOCIATION
DIVISION 03: CONCRETE
DIVISION 01: GENERAL REQUIREMENTS
ASTM E84: "STEINER TUNNEL TEST": STANDARD TEST METHOD FOR SURFACE BURNING CHRACTERISTICS OF BUILDING MATERIALS: WALL FINISHES AND CEILING. DETERMINATES: SMOKE DEVELOPED INDEX AND CLASSIFIES THE FLAME SPREAD IN MATERIAL BY: (A) I-MOST FLAME RESISTANT 0-25. (B) II-26-75. (C) III-(RESIDENTIAL) 76-200.
NFPA 265: "ROOM CORNER TEST": SOME TIMES REQUIRE IN ADTION OR INSTEAD OF ASTM E84. DETERMINES THE CONTRIBUTION OF INTERIOR WALL AND CEILING COVERINGS TO FIRE GROWTH. (WALL FINISHES)
BIFMA X5.4: OFFICE LOUNGE SEATING
AIA 201: GENERAL CONDITION CONTARCT FOR CONSTRUCTION SERVICES
NFPA 266 - CAL TB 133: FULL SEATING. ACTUAL SAMPLE OF CHAIR TEST TO OPEN FLAME.
BIFMA SOHO S6.5: SMALL OFFICE/HOME OFFICE
ASTM D2261: "TEARING STRENGH TEST, TONGUE METHOD": TEARING RESISTANCE OF FABRIC AFTER AN INITIAL CUT HAS BEEN MADE ON THE FABRIC.
ASTM D4966: "MARTINDALE ABRASION TEST": SIMILAR TO WYZENBEEK TEST. DETERMINES THE ABRASION RESISTANCE OF TEXTILE FABRICS. GENERALLY WITH PILE DEPH OF LESS THAN 0.08"
NFPA 252 - UL 10B: STANDARD METHOD FOR FIRE TEST OF DOOR ASSAMBLIES, IS THE STANDARD METHOD OF TESTING FIRE DOORS.
BIFMA X5.1: OFFICE GENERAL CHAIR
BIFMA X5.5: DESK PRODUCT
DIVISION 23: HVAC
NFPA 261 - CAL TB 116: CIGARETTE IGNITION RESISTNCE. TEST FOR FURNITURE COMPOSITES. MOCK UP OF SEAT CUSHION, INCLUDING FOAM, LINER AND FABRIC.
ASTM E662 - NFPA 258: STANDARD TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIAL. MESUARES THE AMOUNT OF SMOKE GIVEN OFF BY A FLAMMING OR SMOLDERING MATERIAL. MOST CODES REQUIRE A SMOKE DENSITY OF 450 OR LESS FOR FINISH MATERIALS. (WALL FINISHES)

Start Studying!

Deck Info

Number of cards 84